Ir para o conteúdo principal

Alterações no passo #3

Edição por Ron Davis

Edição aprovada por Ron Davis

Antes
Depois
Sem alteração

Linhas de Passo

[* red] Lift the piece surrounding the Home button off of its pegs.
[* black] Pry it off of the other side, using a spudger on the pins.
-[* icon_note] A plastic spudger is recommended.
+[* icon_caution] A standard nylon spudger is recommended for this step. Using a metal spudger near the motherboard as shown risks damaging your device.
[* icon_note] Removing this piece may require a lot of force.