Ir para o conteúdo principal

Alterações no passo #2

Edição por Ron Davis

Edição aprovada por Ron Davis

Antes
Depois
Sem alteração

Linhas de Passo

[* red] Remove the bumpers by prying them off of the pegs that secure them, using a spudger. They are located on the front and back of the controller.
-[* icon_note] A plastic spudger is recommended.
+[* icon_caution] A standard nylon spudger is recommended for this step. Using a metal spudger near the motherboard as shown risks damaging your device.