Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #3

Edição por Evan Mayer —

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Lift the Logic Boardlogic board from the casing.
[* black] Carefully remove the large ribbon-wire by pulling the wire where it connects with the Logic Boardlogic board.
[* icon_note] In order to completely remove the Logic Boardlogic board, you must desolder the small ribbon wire from the casing.
[* black] Lift the Logic Boardlogic board from the casing.
[* black] Carefully remove the large ribbon-wire by pulling the wire where it connects with the Logic Boardlogic board.
[* icon_note] In order to completely remove the Logic Boardlogic board, you must desolder the small ribbon wire from the casing.