Alterações no passo #3
Edição por Evan Mayer —
- Antes
- Depois
- Sem alteração
Linhas de Passo
| [* black] [* black] Carefully remove the large ribbon-wire by pulling the wire where it connects with the Logic Board. [* black] '''Note:''' In order to completely remove the Logic Board, you must desolder the small ribbon wire from the casing. |
| [* black] [* black] Carefully remove the large ribbon-wire by pulling the wire where it connects with the Logic Board. [* black] '''Note:''' In order to completely remove the Logic Board, you must desolder the small ribbon wire from the casing. |