Pular para o conteúdo principal

Alterações no passo #1

Edição por Andrew Bookholt

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Begin pryingUse the edge of an iPod opening tool to begin peeling the loop of copper tape wrapped around the front panel connector with an iPodnear the center of the top edge of the logic board.
[* black] Continue peeling the tape until it is free from the logic board.
[* icon_note] Using a pair of tweezers to peel the tape greatly simplifies the task.
[* black] Begin pryingUse the edge of an iPod opening tool to begin peeling the loop of copper tape wrapped around the front panel connector with an iPodnear the center of the top edge of the logic board.
[* black] Continue peeling the tape until it is free from the logic board.
[* icon_note] Using a pair of tweezers to peel the tape greatly simplifies the task.