Ir para o conteúdo principal

Alterações no passo #1

Edição por Taylor Dixon

Edição aprovada por Taylor Dixon

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Use the flat end of a spudger to lift the digitizer cable connector straight up off of its socket.
-[* icon_caution] Be careful to lift from the short side of the socket (NOT like the picture shows) as the pins in the socket are extremely fragile and can easily break requiring a replacement logic board!
+ [* icon_caution] Be careful as you lift the connector from the socketthe pins in the socket are extremely fragile and can easily break!