Ir para o conteúdo principal

Alterações no passo #6

Edição por Nick

Edição aprovada por Nick

Antes
Depois
Sem alteração

Linhas de Passo

[title] Clean the contacts in the printer
-[* icon_caution] If this is area is not cleaned, the printer may produce ***Ink system failure*** errors. Depending on when the error happens, this can result in calibration erasure.
-[* black] With the printhead removed, inspect the electrical contacts in the printer. If you see any ink, wipe this area down with a alcohol covered napkin or an alcohol wipe. It's better to do this while the printhead is out, since it's convenient.
+[* icon_caution] ***Failure to clean this area may result in Ink System Failure warnings. This may erase your calibration if it happens at startup.***
+[* black] With the printhead removed, inspect the electrical contacts in the printer. If you see any ink, wipe the contact pads in the printer using a alcohol wipe. Doing this now will mitigate most problems.