Ir para o conteúdo principal

Alterações no passo #6

Edição por Nick

Edição aprovada por Nick

Antes
Depois
Sem alteração

Linhas de Passo

[title] Clean the contacts in the printer
-[* icon_note] If this is area is not cleaned, your printer may give you a ***Ink System Failure*** error. This error does not jeopardize the calibration data if the printhead is making good electrical contact, but it is likely to crash very frequently.
-[* black] To avoid ***Ink System Failure*** crashes, inspect the electrical contacts in the printer. If you find these have ink on them, wipe the contacts in the printer down with a alcohol covered napkin or eyeglass cleaner wipes. Do this BEFORE reinstalling the printhead.
+[* icon_note] If this is area is not cleaned, this can cause ***Ink System Failure*** errors if there is a lot of ink here. This does not jeopardize the calibration data if the printhead is making good electrical contact, but the printer will crash frequently if it builds up/
+[* black] To avoid ***Ink System Failure*** crashes, inspect the electrical contacts in the printer. If you find ink, clean the contacts in the printer with an alcohol wipe or a napkin covered in alcohol. Do this BEFORE reinstalling the printhead.