Ir para o conteúdo principal

Alterações no passo #6

Edição por Nick

Edição aprovada por Nick

Antes
Depois
Sem alteração

Linhas de Passo

[title] Cleaning the contacts on the printer
+[* icon_note] If this is area is not cleaned, your printer may crash again with a ***Ink System Failure*** error. This error does not jeopardize the calibration data, but it will persistently crash like this until the contacts are cleaned up on both the printhead and contact strip within the printer.
[* black] If the contacts in the printer are dirty, clean these before reinstalling the printhead.
-[* icon_note] If this is not cleaned, the ink will continue to build up and eventually, cause the printer to error out with a false ink system failure message. This doesn't destroy the cal data, but if you clean it wrong you do risk losing it. It's better to do this while the data is safe, especially if it's already dirty.