Ir para o conteúdo principal

Alterações no passo #2

Edição por Nick

Edição aprovada por Nick

Antes
Depois
Sem alteração

Linhas de Passo

[title] Getting hot water
-[* icon_caution] ***Using water from a coffee machine is not recommended if it can be avoided. The water is very likely to be dirty, which can cause problems. Boiling water is much better because this is typically very clean.***
-[* icon_reminder] If a source like a coffee maker is used to get hot water, a filter should be installed to clean the water as much as possible before use. On Keurig coffee makers, the easiest way to do this is to remove the coffee pod holder. While it doesn't need to be 100% clean, it should be as clean as you can get it.
-[* black] Go to a source where you can get hot water, and heat the water up. Using hot water helps break the ink down faster and can improve your chance of success.
+[* icon_caution] ***Using water from a coffee machine is not recommended IF it can be avoided. It is better to warm up distilled water for this process.***
+[* icon_reminder] If a source like a coffee maker is used to get hot water, filter the water before use. On a Keurig coffee maker the easiest way to reduce deposits is to remove the coffee pod holder. It will not be perfectly clean, but it will not be anywhere near as dirty.
+[* black] To clean the printhead, you will need to use hot water. Before working on the printer, hot water should be collected. While cold water can be used, hot water is more likely to clear the dried ink.