Ir para o conteúdo principal

Alterações no passo #2

Edição por Nick

Edição aprovada por Nick

Antes
Depois
Sem alteração

Linhas de Passo

[title] Getting hot water
-[* black] Go to a source where you can get hot water, and prepare the water for heating. Hot water is used to clean the head quickly and improve the odds of recovering the printer. ***Note: While water from a source like a coffee maker works, it may not be the best source. Distilled water is recommended, if possible.***
-[* icon_note] If a source like a coffee maker is used, it is recommended that a filer be installed before getting water for the cleaning. It will help the quality of the water, but it still is not a good source if you have better options.
+[* icon_note] If a coffee maker is used to source hot water, a filter should be installed to make sure the water is as clean as possible (and remove the coffee pod holder on Keurigs). You want the water to be as clean as you can practically get it. Coffee maker water is not recommended if you have better options, as this water is typically not very good.
+[* black] Go to a source where you can get hot water, and prepare the water for heating. Hot water is used to clean the head quickly and improve the odds of recovering the printer. ***Note: While water from a source like a coffee maker works, it may not be the cleanest. Boiled distilled water is recommended.***