Ir para o conteúdo principal

Alterações no passo #7

Edição por Nick

Edição aprovada por Nick

Antes
Depois
Sem alteração

Linhas de Passo

[title] Clean the printhead
[* icon_caution] ***''Only use alcohol as a final option. It may damage the printhead seals! IF USED, FLUSH WITH CLEAN WATER 3 TIMES.''***
[* icon_reminder] ***''Recommended circulation times:''*** ***Alcohol:*** 5-10 minutes. ***Without alcohol:*** 15 minutes.
-[* icon_note] The water will get lighter as the ink breaks down. ***''An ultrasonic cleaner may help with stubborn clogging.''***
-[* red] Put the printhead in hot water. Let it sit until it is reasonably clean. ***''Change the water as it turns black.''***
-[* orange] ***''Wipe down the printhead contacts and nozzles by hand to ensure these areas are dry.''***
+[* icon_note] The water will get lighter as the ink breaks down. ***''An ultrasonic cleaner may help break stubborn clogs.''***
+[* red] Put the printhead in hot water. Repeat until the printhead is reasonably clean. ***''Change the cleaning water frequently.''***
+[* orange] ***''Wipe the printhead contacts and nozzles by hand to ensure these areas are dry.''***
[* yellow] Before reinstalling the printhead, let it air dry for ~3-4 hours. ***''Using a fan may speed this step up.''***