Pular para o conteúdo principal

Alterações no passo #14

Edição por Miroslav Djuric

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Sadly for usSadly, the Streak's LCD is completelypermanently adhered to the front panel likeglass (like the [guide|3130|iPhone 4|stepid=15351]4|stepid=15351]) and cannot be separated. However, that LCD/glass subassembly is held in the frame with some very strong 3M adhesive, but could be removed intactwith enough careful prying.
[* icon_note] The LCD is bonded to the front panel glass to help increase the strength of the device and to increase the sensitivity of the capacitive touch panel.
[* black] Sadly for usSadly, the Streak's LCD is completelypermanently adhered to the front panel likeglass (like the [guide|3130|iPhone 4|stepid=15351]4|stepid=15351]) and cannot be separated. However, that LCD/glass subassembly is held in the frame with some very strong 3M adhesive, but could be removed intactwith enough careful prying.
[* icon_note] The LCD is bonded to the front panel glass to help increase the strength of the device and to increase the sensitivity of the capacitive touch panel.
[* black] The inner face of the front panel assembly isn't all that exciting. The ear speaker and vibrator motor can be seen near its top edge.
[* black] The touchscreen ribbon cable houses:
[* red] Pixcir's [link|http://www.digitimes.com/news/a20100111PD216.html|controversial] Tango S32 Touchscreen controller
[* orange] Atmel's ATmega168P 8-bit AVR microcontroller