Ir para o conteúdo principal

Alterações no passo #4

Edição por tff

Edição aprovada por tff

Antes
Depois
Sem alteração

Linhas de Passo

+[title] Release spring tension in the stand if necessary
+[* black] The screws circled in red maintain the pressure on the coil springs in the stand. If you can maneuver the iMac relative to the stand such that the gap highlighted by the green arrow (pic2) closes all the way, then pressure from the coil springs will be removed from the external part of the stand.
+[* black] I couldn't do that, so I removed these screws to release the pressure between the internal and external part of the stand.
+[* black] NOTE: once the screw is released, the coil spring will launch the plastic piece that holds the spring! (It took me quite a while to find the first one.) I highly recommend covering the screw with something (pic3) as you remove the screw.
+[* black] New line.

Imagem 1

Nenhuma imagem anterior

Adicionado

Imagem 2

Nenhuma imagem anterior

Adicionado

Imagem 3

Nenhuma imagem anterior

Adicionado