Skip to main content

Alterações no passo #3

Edição por Andrew Optimus Goldheart

Edição aprovada by Andrew Optimus Goldheart

Sem alteração

Linhas de Passo

[title] Wires and Soldering
[* black] The speaker is connected to the main board by two soldered wires. The locations of the each soldered wire are circled in red on the image to the left.
[* black] De-solder the wires to the old speaker and set it aside.
[* black] Solder the wires onto the new speaker.
[* icon_note] The polarity (+ or –) of the wires is not important, so it is okay if you swap them.