Alterações no passo nº 3
Edição por Andrew Garris —
Edição aprovada por Andrew Garris
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* green] The speaker is connected to the main board by two soldered wires. The location on the circuit board is highlighted in the image on the left. |
|---|---|
| - | [* green] Before you can replace the speaker, you must desolder the wires connected to the old speaker. You can now solder the wires on to the new speaker. The polarity (+ or -) of the wires is not important, so it is okay if you swap them. |
| + | [title] Wires and Soldering |
| + | [* black] The speaker is connected to the main board by two soldered wires. The location on the circuit board is highlighted in the image on the left. |
| + | [* black] Before you can replace the speaker, you must desolder the wires connected to the old speaker. You can now solder the wires on to the new speaker. The polarity (+ or -) of the wires is not important, so it is okay if you swap them. |