Alterações no passo nº 3
Edição por Andrew Tramposch —
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] The speaker is only connected to the circuit board via two wires. Replacing is fairly simple. | |
| - | [* black] All that need be done is remove the old speaker and solder in a new one. Make sure that the correct speaker is used. As only a certain amount of electricity is allocated for use. |
| + | [* black] All that need be done is remove the old speaker and solder in a new one. Make sure that the correct speaker is used(Model # and make are printed on the outside). As only a certain amount of electricity is allocated for use. |