Skip to main content

Alterações no passo #3

Edição por Kelsea Weber

Edição aprovada by Kelsea Weber

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] The speaker is connected tored] Desolder the main board by two soldered wires. The locations of the each soldered wire are circled in red on the image to the left.
[* black] De-solder the
wires toconnecting the old speaker and set it aside.
[* black] Solder
to the wires onto the new speaker.
[* icon_note] The polarity (+ or –) of the wires is not important, so it is okay if you swap them
motherboard.
[* black] The speaker is connected tored] Desolder the main board by two soldered wires. The locations of the each soldered wire are circled in red on the image to the left.
[* black] De-solder the
wires toconnecting the old speaker and set it aside.
[* black] Solder
to the wires onto the new speaker.
[* icon_note] The polarity (+ or –) of the wires is not important, so it is okay if you swap them
motherboard.

Imagem 1

Versão Antiga

Nova Versão

Imagem 2

Versão Antiga

Nova Versão