Skip to main content

Alterações no passo #3

Edição por Richdave

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* blackred] The speaker is connected to the main board with two soldered wires.
[* blackviolet] To replace the speaker, desolder the wires from the old one and solder them on to the new speaker. The polarity of the wires is not important, so it's okay if you swap them.
[* blackred] The speaker is connected to the main board with two soldered wires.
[* blackviolet] To replace the speaker, desolder the wires from the old one and solder them on to the new speaker. The polarity of the wires is not important, so it's okay if you swap them.

Imagem 2

Versão Antiga

Nova Versão