Skip to main content

Alterações neste passo

Edição por Andrew Optimus Goldheart

Edição aprovada by Andrew Optimus Goldheart

Excluído
Adicionado
Sem alteração

Linhas de Passo

[title] Speaker on the Circuit Board
[* black] The speaker has two components:
[* icon_note] 1) The part connected to the circuit board is what you will be replacing.
[* icon_note] 2) The other part of the speaker is connected to the front plastic case and should not be removed. Make sure that this part it stays in place before re-assembly since may come out a little bit in this step.
[* black] The speaker is now easily accessible on the bottom left corner of the circuit board. The speaker is circled in red on the image to the left.