Ir para o conteúdo principal

Alterações no passo #29

Edição por Timothy McEvoy

Edição aprovada de Taylor Dixon

Sem alteração

Linhas de Passo

[* icon_note] Do not attempt to fully remove the LCD. It is still connected to the iPad by several cables at the home button end. Lift only from the front-facing camera end.
[* black] Insert the flat end of a spudger under the LCD between it and the LCD shield plate and lift gently.
[* icon_caution] Be very careful not to get the spudger under the shield plate. It must be between the LCD and the shield. On the LTE models, the antennas are underneath the ends so there is a bit of adhesive holding this end of the LCD down.
[* icon_caution] Even bending the LCD slightly will crack it so be extremely careful.