Ir para o conteúdo principal

Alterações no passo #29

Edição por Taylor Dixon

Edição aprovada de Taylor Dixon

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* icon_note] Do not attempt to fully remove the LCD. It is still adhered in place and connected to the iPad by several cables at the home button end. Lift only from the front-facing camera end.
[* icon_note] Do not attempt to fully remove the LCD. It is still adhered in place and connected to the iPad by several cables at the home button end. Lift only from the front-facing camera end.
[* black] Insert the flat end of a spudger under the LCD between it and the LCD shield plate and lift gently.
[* icon_caution] Be very careful not to get the spudger under the shield plate. It must be between the LCD and the shield.
[* icon_caution] Even bending the LCD slightly can permanently damage it, so be extremely careful as you lift.
[* icon_note] There are two long thin strips of adhesive (one on either side) that run along the edges of the display.
[* icon_reminder] To
You can try these alternate removal methods to reduce chancesyour chance of cracking the LCD during the two most used methods without prying up areremoval process:
[* black] RunningRun a thin string (like floss or fishing lineline) under the displaydisplay, starting from the top then working your way down
[* black] UsingUse a thin plasticthin, flexible card or a plastic money note to cut through the adhesive starting from the top.
[* icon_note] There are two long thin strips of adhesive (one on either side) that run along the edges of the display.
[* icon_reminder] To
You can try these alternate removal methods to reduce chancesyour chance of cracking the LCD during the two most used methods without prying up areremoval process:
[* black] RunningRun a thin string (like floss or fishing lineline) under the displaydisplay, starting from the top then working your way down
[* black] UsingUse a thin plasticthin, flexible card or a plastic money note to cut through the adhesive starting from the top.