Alterações no passo #29
Edição por Ben —
Edição aprovada de Taylor Dixon
- Excluído
- Adicionado
- Sem alteração
Linhas de Passo
| [* icon_note] Do not attempt to fully remove the LCD. It is still connected to the iPad by several cables at the home button end. Lift only from the front-facing camera end. |
| [* black] Insert the flat end of a spudger under the LCD between it and the LCD shield plate and lift gently. |
| [* icon_caution] Be very careful not to get the spudger under the shield plate. It must be between the LCD and the shield. |
| [* icon_caution] Even bending the LCD slightly can permanently damage it, so be extremely careful as you lift. |
| [* icon_note] There are two long thin strips of adhesive (one on either side) that run along the edges of the display. |
| [* icon_reminder] To reduce chances of cracking the LCD the two most used methods without prying up are: |
| [* black] Running a thin fishing line under the display starting from the top then working your way down |
| [* black] Using a thin plastic card or a plastic money note to cut through the adhesive starting from the top. |