Conserte seus objetos Comunidade Loja

Alterações no passo nº 4

Edição por Oneika White —

Edição aprovada por Kristen Gismondi

Antes
Depois
Sem alteração

Linhas do passo

[title] Dismounting the Ribbon Connector
-[* black] Grip the ribbon connector with your thumb and forefinger. Pull gently until the connector comes out of its socket.
-[* icon_caution] WARNING - Pull gently on the connector (not the ribbon itself).
-[* black] Pull gently until the connector comes out of its socket.
-[* icon_note] The front and back of the device should completely separate.
+[* black] Grip the ribbon connector with your thumb and forefinger. Pull gently until the connector, not the ribbon itself, comes out of its socket.
+ [* icon_caution] WARNING - Pull gently on the connector (not the ribbon itself).
+[* black] Check that the front and back casing of the device are completely separate after you remove the connector.
+ [* icon_note] The front and back of the device should completely separate.