Conserte seus objetos Comunidade Loja

Alterações no passo nº 2

Edição por Andrew Tramposch —

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas do passo

[* black] Grab each side of the system, pulling the two pieces apart slowly.
-[* black] Once you can see the connector, pull the opposite side down a little bit so you can get to the connector to pull it out of its socket.
+[* black] Once you can see the ribbon connector, pull the opposite side down a little bit so you can get to the ribbon connector to pull it out of its socket.