Alterações no passo nº 2
Edição por Tad Steiner —
Edição aprovada por Tad Steiner
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Use the plastic spudger to pry the lower speaker out. |
|---|---|
| + | [* black] Use the flat end of the plastic spudger to pry the lower speaker out. |
| [* black] Holding the phone, pull the speaker to the right pulling the connector out of the board. | |
| [* icon_caution] The connector is very small and easy to break so take caution when pulling it out. Wiggling the wires as you pull to the right helps. |