Conserte seus objetos Comunidade Loja

Alterações no passo nº 1

Edição por Kaylan Naicker —

Edição aprovada por Kaylan Naicker

Antes
Depois
Sem alteração

Linhas do passo

[title] Removing the shock screw
-[* black] Find the screws behind the shocks. They should be similar to the ones that connected the front wheel.
-[* black] Remove the screw in the same manner as the wheel. While applying pressure to the left side, unscrew the right using an Allen wrench.
- [* blue] If the left side of the screw rotates when you attempt to unscrew the right, use a second Allen wrench to hold it in place.
- [* blue] If the screw does not turn at all or does not turn easily, apply lubricant to the screw and try again in five minutes.
-[* black] Remove the ends of the screw and the black rubber stoppers. Remove the metal tube between the screws.
+[* red] Find the screws behind the shocks. They should be similar to the ones that connected the front wheel.
+[* orange] Remove the screw in the same manner as the wheel. While applying pressure to the left side, unscrew the right using an Allen wrench.
+ [* icon_note] If the left side of the screw rotates when you attempt to unscrew the right, use a second Allen wrench to hold it in place.
+ [* icon_note] If the screw does not turn at all or does not turn easily, apply lubricant to the screw and try again in five minutes.
+[* yellow] Remove the ends of the screw and the black rubber stoppers. Remove the metal tube between the screws.