Alterações no passo nº 1
Edição por Kaylan Naicker —
Edição aprovada por Kaylan Naicker
- Antes
- Depois
- Sem alteração
Linhas do passo
| + | [title] Removing the screw |
|---|---|
| + | [* black] Orient the scooter so that the front wheel is facing you. Observe the right and left side of the wheel. Remember which is which throughout the guide. |
| + | [* black] Using an Allen wrench, unscrew the screw slowly from the right side while applying a constant pressure with your hand on the left side of the screw. |
| + | [* blue] If the left side of the screw turns while you unscrew the right side, you will need to use a second Allen wrench to prevent it from moving |
| + | [* blue] If the screw does not move at all, or moves very little, try applying a lubricant on as much of the screw as possible and try again in 5 minutes. |
| + | [* black] Carefully pull apart the screws from the left and right side of the wheel. |
Imagem 1
Nenhuma imagem anterior
Adicionado
Imagem 2
Nenhuma imagem anterior
Adicionado
Imagem 3
Nenhuma imagem anterior
Adicionado