Ir para o conteúdo principal

Alterações no passo #3

Edição por Tad Steiner

Edição aprovada por Tad Steiner

Antes
Depois
Sem alteração

Linhas de Passo

-[* red] Using the spudger, pop up the white tabs on all ribbon cable connectors located to the left and right of the copper plate.
+[* red] Using the flat end of the spudger, pop up the white tabs on all ribbon cable connectors located to the left and right of the copper plate.
[* icon_note] On the left side, pop the white tab up to the left. On the right, pop up to the right.
[* black] Carefully pull out the ribbon cables.