Pular para o conteúdo principal

Alterações no passo #3

Edição por Charlie Franklin

Edição aprovada por Charlie Franklin

Excluído
Adicionado
Sem alteração

Linhas de Passo

[title] Un-Mounting the Power Supply Unit
[* red] Remove the 4 marked 3.5mm6-32 hex screws with a 1x1.5mm2mm Phillips hex screwdriver.
[* icon_note] New lineThere are a number of Phillips head screws underneath. These don't need to be removed to remove the power supply.
[* red] Remove the 4 marked 3.5mm6-32 hex screws with a 1x1.5mm2mm Phillips hex screwdriver.
[* icon_note] New lineThere are a number of Phillips head screws underneath. These don't need to be removed to remove the power supply.