Ir para o conteúdo principal

Alterações no passo #11

Edição por jeeyunsun

Edição aprovada por jeeyunsun

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Pull the on/off switch off of the 120V field, paying careful attention to the prongs on the on/off switch.
+[* black] Remove the 2 wires on the back of the switch, connecting the cord to the switch, by inserting a small metal pick into the hole next to the wires and pulling the pick and the wire out together.
[* red] For reassembly, make sure the prongs are touching the metal connecters on the bottom of the 120V field.