Conserte seus objetos Comunidade Loja

Alterações no passo nº 1

Edição por Mark Blanc —

Edição aprovada por Mark Blanc

Antes
Depois
Sem alteração

Linhas do passo

[title] Open the controller
[* black] Turn the controller over, exposing the three screws on the back (marked by the orange circles). Use a 6mm screwdriver to remove these screws.
[* black] Carefully slide and pull the two parts of the controller shell apart, exposing the innards.
-[* icon_caution] Try not to move the joystick when reassembling. This will almost assuredly break your alignment. The less the joystick is moved, the easier it will be to realign the joystick to the pots.
+[* icon_caution] Do not to move the joystick when reassembling. This will break your alignment. The less the joystick is moved, the easier it will be to realign the joystick to the pots.