Alterações no passo nº 1
Edição por Alan Abelson —
Edição aprovada por Alan Abelson
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Turn the controller over, exposing the three screws on the back. Use a 6mm screwdriver to remove these screws. | |
| [* black] Carefully slide and pull the two parts of the controller shell apart, exposing the innards. | |
| + | [* icon_caution] Try not to move the joystick when reassembling. This will almost assuredly break your alignment. The less the joystick is moved, the easier it will be to realign the joystick to the pots. |