Alterações no passo nº 4
Edição por obo —
Edição recusada por Spencer Day
- Antes
- Depois
- Sem alteração
Linhas do passo
| + | [* black] Locate your removal tool (a SIM-eject tool or paperclip). Insert the removal tool into the small hole next to the SIM card tray, and press gently but firmly until the tray pops out. Pull the tray out from its slot. |
|---|---|
| [* black] Slide a thin guitar pick or pry tool between the edge of the display and the rear case, near the bottom of the phone. | |
| - | [* black] Carefully work your way up each side of the display and separate the rear case. There are three clips on each side. |
| + | [* black] Carefully work your way up each side of the display and separate the rear case. There are three clips on each side. Do not force against the edge of the screen. There is a high risk to break the screen and or the case during this step. |