Histórico do passo nº 4 do guia Trek 4300 Bicycle Brakes Replacement

Alterações no passo nº 4

Edição por Emily OConnor — 20 de nov de 2014

Edição aprovada por Emily OConnor

	[title] Adjusting the Brake Pads
	[* black] Make sure the top of the pad is facing up.
-	[* ~~black~~] The brake pad should have a subtle curve and should be aligned so that the curve of the brake pad matches the curve of the wheel.
+	[* icon_reminder] The brake pad should have a subtle curve and should be aligned so that the curve of the brake pad matches the curve of the wheel.
	[* black] Slide the break pad to the correct height in the caliper so that the pad is making contact only with the rim of the bike.
	[* black] Holding the brake pad in place with one hand, tighten the bolt until snug. This should not require a great amount of force, but you should not be able to wiggle the brake pad after tightening.
	[* black] Repeat these procedures for both sides.