Alterações no passo nº 4
Edição por Emily OConnor —
Edição aprovada por Emily OConnor
- Antes
- Depois
- Sem alteração
Linhas do passo
| + | [title] Adjusting the Brake Pads |
|---|---|
| + | [* black] Make sure the top of the pad is facing up. |
| + | [* black] The brake pad should have a subtle curve and should be aligned so that the curve of the brake pad matches the curve of the wheel. |
| + | [* black] Slide the break pad to the correct height in the caliper so that the pad is making contact only with the rim of the bike. |
| + | [* black] Holding the brake pad in place with one hand, tighten the bolt until snug. This should not require a great amount of force, but you should not be able to wiggle the brake pad after tightening. |
| + | [* black] Repeat these procedures for both sides |