Ir para o conteúdo principal

Alterações no passo #2

Edição por jalil

Edição recusada de Evan Noronha

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Orient the console so that the words "XBOX 360" on the sides are right-side up, and the faceplate is facing to the left.
[* black [* yellow] Insert a metal spudger between the top vent and the top bezel near the rear of the Xbox.
[* blackicon_note] Rotate the spudger away from the console, prying the edge of the fan vent up until the two plastic clips come free.
[* black [* yellow] Insert a metal spudger between the top vent and the top bezel near the rear of the Xbox.
[* blackicon_note] Rotate the spudger away from the console, prying the edge of the fan vent up until the two plastic clips come free.
[* icon_note] Be sure to rotate the spudger far enough so that the plastic clips clear the silver rim of the top bezel.