Pular para o conteúdo principal

Alterações no passo #2

Edição por Ursopeppy

Edição recusada por Jake Devincenzi

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Orient the console so that the words "XBOX 360" on the sides are right-side up, and the faceplate is facing to the left.
[* black] Insert a metal spudger between the top vent and the top bezel near the rear of the Xbox.
[* black] Rotate the spudger away from the console, prying the edge of the fan vent up until the two plastic clips come free.
[* icon_noteicon_caution] Be sure to rotate the spudger far enough so that the plastic clips clear the silver rim of the top bezelbezel be careful when you do it or you may break the spudger or your Xbox 360.
[* icon_noteicon_caution] Be sure to rotate the spudger far enough so that the plastic clips clear the silver rim of the top bezelbezel be careful when you do it or you may break the spudger or your Xbox 360.