Alterações no passo nº 5
Edição por Caleb Kelsay —
Edição aprovada por Caleb Kelsay
- Antes
- Depois
- Sem alteração
Linhas do passo
| + | [* black] Use wide plastic pry tool to pry around the edge of the phone to detach the back aluminum plate from main assembly. |
|---|---|
| + | [* icon_caution] Pry carefully around the card slots. |
| + | [* black] Slowly pull up from the right side like opening a book and use 2.5 flat head from iFixit tool kit to peel foam adhesive around the camera away from the back plate. |
| + | [* icon_caution] The plastic piece for the power button may fall out. Set it aside for reassembly. |