Pular para o conteúdo principal

Alterações no passo #10

Edição por Nicolas Siemsen

Edição aprovada por Nicolas Siemsen

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Slip the replacement bracket back under the oil feed tube. It can be a bit of a puzzle getting it in just the right way, but you'll get it.
[* black] Then start the upper three bolts but leave some room for the bracket to move so you can start the lower bolt.
[* black] Start the lower bolt by hand. You'll need to do it beby feel - just take your time. Make sure to get it in part way by hand before switching to your wrench to avoid cross threading it.
[* black] Start the lower bolt by hand. You'll need to do it beby feel - just take your time. Make sure to get it in part way by hand before switching to your wrench to avoid cross threading it.
[* black] Finishing up by tightening down all the bolts.