Pular para o conteúdo principal

Alterações no passo #6

Edição por Nicolas Siemsen

Edição aprovada por Nicolas Siemsen

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Underneathred] Underneath the air cleaner housing you'll find the bracket. It bolts to the exhaust manifold.
[* black] Not pictured are the three rubber buffers that screw in to the bracket, which the 10mm nuts in the air cleaner housing were attached to. They help absorbs some of the vibration to the housing.
[* black] If the rubber buffers don't unscrew by hand use a pair of pliers to grip them and unscrew them from the bracket before continuing.
[* green] Then use a 13 mm socket and socket wrench to remove the two 13mm bolts on top of the bracket, and the 10mm bolt that holds the oil feed line for the turbo to the bracket.
[* black] Underneathred] Underneath the air cleaner housing you'll find the bracket. It bolts to the exhaust manifold.
[* black] Not pictured are the three rubber buffers that screw in to the bracket, which the 10mm nuts in the air cleaner housing were attached to. They help absorbs some of the vibration to the housing.
[* black] If the rubber buffers don't unscrew by hand use a pair of pliers to grip them and unscrew them from the bracket before continuing.
[* green] Then use a 13 mm socket and socket wrench to remove the two 13mm bolts on top of the bracket, and the 10mm bolt that holds the oil feed line for the turbo to the bracket.

Imagem 1

Versão Antiga

Nova Versão