Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Alterações no passo #9

Edição por Taylor Arnicar

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

[* black] De-route the digitizer and LCD cables through the steel inner frame.
[* icon_caution] Before re-fastening the front panel to the steel inner frame, be sure both the LCD and digitizer cables are not folded or pinched between the inner frame and the front panel assembly. This will result in possibly damaging the cables and not having enough slack when reconnecting the them to the logic board.
[* icon_note] ''BothWhen the front panel has been correctly installed, both the LCD and digitizer cables should be immediately next to eachone another, and the connectors should be just hanging over the steel frame, when the front panel has been correctly installed.''frame.
[* icon_note] ''BothWhen the front panel has been correctly installed, both the LCD and digitizer cables should be immediately next to eachone another, and the connectors should be just hanging over the steel frame, when the front panel has been correctly installed.''frame.