Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Alterações no passo #9

Edição por klubn

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

[* black] De-route the digitizer and LCD cables through the steel inner frame.
[* icon_remindericon_caution] Before re-fastening the front panel to the steel inner frame, be sure both the LCD and digitizer cables are not folded or pinched between the inner frame and the front panel assembly. This will result in possibly damaging the cables and not having enough slack when reconnecting the them to the logic board.
[* icon_note] ''Both the LCD and digitizer cables should be immediately next to each another, and the connectors just hanging over the steel frame, when the front panel has been correctly installed.''
[* icon_remindericon_caution] Before re-fastening the front panel to the steel inner frame, be sure both the LCD and digitizer cables are not folded or pinched between the inner frame and the front panel assembly. This will result in possibly damaging the cables and not having enough slack when reconnecting the them to the logic board.
[* icon_note] ''Both the LCD and digitizer cables should be immediately next to each another, and the connectors just hanging over the steel frame, when the front panel has been correctly installed.''