Skip to main content

Alterações no passo #7

Edição por Sam Goldheart

Edição aprovada by Sam Goldheart

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Insert a plastic card under the logic board edge of the battery.
[* icon_caution] Be careful to keep the card as flat as possible to avoid bending the battery, which may damage it and cause it to release dangerous chemicals.
[* black] Press the card in at several points if necessary to break up the adhesive behind the battery.

Imagem 1

Nenhuma imagem anterior

Adicionado