Skip to main content

Alterações no passo #2

Edição por Sam Goldheart

Edição aprovada by Sam Goldheart

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Gently pull the battery adhesive tab away from the battery, toward the bottom of the iPhone.
[* black] Try not to pull against the battery or the lower components, or you may rip the adhesive strip.
[* black] Continue pulling, allowing the strip to slowly slip out from between the battery and the rear case. When you feel increased resistance from the strip, stop pulling and continue with the next step.
[* icon_note] If the battery adhesive tabs break off at any point during the removal process, use your fingers or blunt tweezers to retrieve the remaining length of adhesive, and continue pulling.
[* icon_caution] If either of the adhesive strips breaks off underneath the battery and cannot be retrieved, try to remove the remaining strip, and then proceed to '''Step 25'''.

Imagem 1

Nenhuma imagem anterior

Adicionado

Imagem 2

Nenhuma imagem anterior

Adicionado