Ir para o conteúdo principal

Alterações no passo #13

Edição por MKoch

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

-[* black] Carefully remove the logic board from the iPhone, minding any cables that may get caught.
+[* black] Carefully remove the logic board from the iPhone, minding any cables that may get caught. Pay special attention to the small connector underneath the digitizercable, - it can get caught and thereby break off.
[* icon_caution] Note that there is a rubber guard on the edge of the logic board where the Digitizer and LCD ribbon cables bend over the logic board. Make certain it is there before replacing the logic board during reassembly.