Ir para o conteúdo principal

Alterações no passo #13

Edição por Eyez 4 Dizney

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Carefully remove the logic board from the iPhone, minding any cables that may get caught.
[* icon_caution] Note that there is a rubber guard on the edge of the logic board where the Digitizer and LCD ribbon cables bend over the logic board. Make certain it is there before replacing the logic board during reassembly.
+ [* red] The rubber guard goes above the Digitizer and LCD Ribbon Cables as pictured in the second picture in Red.

Imagem 2

Nenhuma imagem anterior

Adicionado