Ir para o conteúdo principal

Alterações no passo #11

Edição por Andrew Optimus Goldheart

Edição aprovada por Andrew Optimus Goldheart

Antes
Depois
Sem alteração

Linhas de Passo

-[* black] Disconnect the following connectors from the top of the logic board:
- [* red] Digitizer cable (From Bottom)
- [* orange] LCD cable (From Bottom)
- [* yellow] Headphone jack/volume button cable (From Top)
- [* green] Top Microphone/sleep button cable (From Top)
- [* blue] Front camera cable (From Top)
-[* icon_note] It is helpful to use the edge of an iPod opening tool to gently lift the connectors up and out of their sockets on the logic board.
+[* black] Use the edge of a plastic opening tool to gently pry the following connectors up and out of their sockets on the logic board:
+ [* red] Digitizer cable (pry from bottom)
+ [* orange] LCD cable (pry from bottom)
+ [* yellow] Headphone jack/volume button cable (pry from top)
+ [* green] Top Microphone/sleep button cable (pry from top)
+ [* blue] Front camera cable (pry from top)