Ir para o conteúdo principal

Alterações no passo #8

Edição por Brian Rose

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Use an iPod opening tool to slightly lift the top edge of the connector cover away from the logic board.
[* black] Use the tip of a spudger to pull the connector cover retaining clips away from the inner frame.
[* black] Remove the connector cover from the iPhone.
[* icon_caution] Before reassembly, be sure to clean all metal-to-metal contact points on the connector cover with a de-greaser such as Windex. The oils on your fingers have the potential to cause wireless interference issues. ***Do not*** clean the connectors themselves with Windex.
+[* red] Be careful not to detach a small metal grounding clip.
+[* orange] Be careful not to dislodge this small metal nut.

Imagem 1

Versão Antiga

Nova Versão

Imagem 3

Versão Antiga

Nova Versão