Ir para o conteúdo principal

Alterações no passo #7

Edição por Rudy Boyer

Aguardando aprovação

Sem alteração

Linhas de Passo

[* black] Remove the following five screws securing the connector cover to to the logic board:
[* red] One 2.3 mm Phillips
[* orange] Two 1.6 mm Phillips
[* yellow] One 1.4 mm Phillips
[* green] One 4.8 mm Phillips
[* icon_caution] When re-assembling, start off with replacing the 4.8 mm Philips screw first, then the 2.3 mm. ''This is to ensure there is no mix-up, and avoid rendering the LCD and digitizer useless.''
+[* black] When re-assembling, don't let the 2.3mm Phillips fall between the camera and the chassis. The camera is magnetic and it is difficult to retrieve the screw.